OK
Extention Kit required. Motor install location is not confirmed.RESULT |
| SPRING KIT | |||||||||||||
| C H A R A C T E R I S T I C S |
MODEL
YEAR |
ENGINE DISPLACEMENT
DRIVE TRAIN LAYOUT *FF=FWD FR/MR/RR=RWD 4WD=AWD |
CHASSIS CODE | TRIM LEVEL | PRODUCT NAME | PART NUMBER MSRP (excl. TAX) |
STOCK SCHED |
RIDE HEIGHT CHANGE (inch) |
RATE (lbs/in / Kgf/mm) |
||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FREE LENGTH (mm) |
/ | I.D.(mm) | |||||||||||
| STREET | |||||||||||||
| NISSAN SENTRA 1995-1999USA | 2000 FF | B14 | 4DR/4CYL |  | SKP16-S3B00 $365.00 | 4 left | F | -2.4 | 168 | / | 3.7 | ||
| R | -1.2 | 224 | / | 4.9 | |||||||||
| NOTE:TESTED ON SE MODEL. FT: CUT BUMP RUBBER AT 40MM FROM THE TOP AND USE THE LOWER PORTION. RR: CUT BUMP RUBBER AT 20MM FROM THE BOTTOM AND USE THE UPPER PORTION. | |||||||||||||
| NISSAN 200SX 1995-1998USA | 2000 FF | B14 | 2DR/4CYL | | SKP16-S3B00 $365.00 | 4 left | F | -2.4 | 168 | / | 3.7 | ||
| R | -1.2 | 224 | / | 4.9 | |||||||||
| NOTE:TESTED ON SE-R MODEL. FT: CUT BUMP RUBBER AT 40MM FROM THE TOP AND USE THE LOWER PORTION. RR: CUT BUMP RUBBER AT 20MM FROM THE BOTTOM AND USE THE UPPER PORTION. | |||||||||||||
| Copyright TEIN U.S.A. All rights reserved. |